 Scion Auxilary Input Converters:
 Pie TOY03-AUX Scion 2003-2006 Auxiliary input adapter (PRECISION INTERFACE)
|
|
|
|
| Description: |
The Pie Toy03-Aux Auxiliary Input Converter converts the cd Changer port of your factory radio into an auxiliary input. With this converter installed, you can connect any device that has rca outputs directly to your factory radio without using an Fm modulator. The Toy03-Aux works with most 2003-2006 Scion vehicles that are equipped with a radio that has Cd changer controls (See specific application list below). The Toy03-Aux comes equipped with the new, smaller (approximately 3/4in) 12-pin mating plug and "Y" harness, making it compatible in vehicles equipped with factory steering wheel controls.
NOTES:
*Not compatible if factory satellite radio is present
*12-Pin data port at headunit
*Models equipped with oem cd changer may use pie X3 System to main fuction of cd changer
FITS:
-
2004-2006 SCION tC
-
2003-2006 SCION xA
-
2003-2006 SCION xB |
| Base SKU: |
TOY03-AUX |
|
|
|
Pie Toy03-Aux/S Scion 2003-2007 Auxiliary input for satellite ready (PRECISION INTERFACE)
|
|
|
|
|
| Description: |
The Pie Toy03-Aux/s Auxiliary Input Converter converts the 12-pin satellite radio port of your satellite-ready scion factory radio into an auxiliary input. With this converter installed, you can connect the audio from any device that has an audio output directly to your scion factory radio using the left & right Rca connector inputs on the Toy03-Aux/S without using an Fm modulator. The Toy03-Aux/s works with many 2003-2007 scion vehicles that are equipped with a factory radio that has a "Sat" button
-
2003-2007 Xa
-
2003-2007 Xb
-
2004-2007 Tc
If vehicle has factory radio it must be disconnected in order to use the Toy03-Aux/s not compatible if vehicle is equipped with rear seat entertaiment .
The following list some types of compatible auxiliary device
|
| Base SKU: |
TOY03/AUX/S |
|
|
|
|
Pie X3-Toy03 Scion 2003-2006 Triple input auxiliary input interface (PRECISION INTERFACE)
|
|
|
|
|
| Description: |
This is the vehicle-specific x3 T-harness and brain module that connects to the vehicle's audio system. The x3 system includes a Selector Brain Module (included), wired Remote Selector Box (included), and vehicle-specific T-harness (included) for your audio systems. The Selector Brain Module has three pairs of gold-plated RCA inputs for connecting devices such as: I-pod; Digital Satellite Receiver; Dvd player; Vcr/Vcp; PlayStation; Mp3 player; portable MiniDisc; portable Cd; portable Dvd w/built-in monitor. The wired Remote Selector Box can be hand-held or mounted anywhere on or near the dash for ultimate convenience. The Remote Selector Box has a single push-button switch to select between three auxiliary sources and the Cd changer. Status Leds on the Selector Box indicate which source is selected (Aux 1, Aux 2, Aux 3, or the Cd changer) -- convenience in the extreme!
Now you can switch between auxiliary sources at will! The x3 Auxiliary Input Selector allows the user to add up to three auxiliary input sources, connected directly between the Cd changer and factory audio systems. The x3 interrupts the audio of the Cd changer, switching between three user-selectable RCA level auxiliary sources, and defaults back to the Cd changer if desired.
The x3 switchable Auxiliary Input Selector accepts three auxiliary input sources with a Cd changer present!
Vehicle Compatible:
-
2004-2006 TC
-
2003-2006 X4
-
2003-2006 XB
Notes:
For more information call 1-888-231-0395
|
| Base SKU: |
X3-TOY03 |
|
|
|
|
Ipod Docking to rca video & charging cable (PRECISION INTERFACE)
|
|
|
|
|
| Description: |
The PIE AV-POD A/V cable is designed to connect to your iPOD video through the
bottom connector and give you left & right line level audio outputs, as well as a
composite video output that will allow you to connect the iPOD video to an after
market or factory radio that has auxiliary audio and video inputs. The AV-POD will
also charge your iPOD while connected through a 12V and ground connection.
Control of the iPOD will remain with the iPOD.
This device conects to your auxiliary input converter's RCA connectors and to the
bottom connector of your iPOD. You then connect the ground (Blk) wire, the
switched 12V (Red) wire and the constant 12V (Yellow) wire and you are all set.
When connected, you will get the cleanest sound, plus it will also charge your iPOD
while you are using it.
Compatible with iPod Mini, Color, Nano, Photo, Video, G3, G4.
5 volt charging and video
for iPhone , iTouch and new nano use this interface AV-IPD |
| Base SKU: |
AV-POD |
|
|
|
|
Rca Jack to 3.5MM Stereo plug (PRECISION INTERFACE)
|
|
|
|
|
| Description: |
Hi-Clarity Audio 3.5mm to rca jacks Cable to be use with any AUX interface. These high-quality cables give you crisp, clear sound. The dual conductor is 90 percent spiral-wrapped, which provides shielding against electromagnetic and radio frequency interference. The connectors are color-coded for easy installation and identification and provide excellent strain relief. Audio Y Adapter Cables allow you to split a signal or adapt from RCA jacks to3.5mm
|
Product Specifications |
|
Connector |
3.5mm audio |
|
AV Cable Type |
Audio cable |
|
Connector |
RCA (F) |
|
Connectivity Technology |
Shielded |
|
Color |
Black |
|
Length |
6 ft |
|
Contents |
Cable, documentation |
|
Ports/Connectors |
(2) RCA connectors
(1) mini phone stereo 3.5mm male connector |
|
|
|
|
|
|
|
| Base SKU: |
3.5MM RCA |
|
|
|
|
2.5 RCA/4MM Cellphone, Mp3 cable (PRECISION INTERFACE)
|
|
|
|
|
| Description: |
The 2.5-RCA/4MM is a male to male 2.5mm stereo RCA cable that connects as 2.5mm audio
output (mini headphone jack) to the RCA audio input of any aftermarket,oem radio or auxiliary interface
|
Product Specifications |
|
Connector |
2.5mm audio |
|
AV Cable Type |
Audio cable |
|
Connector |
RCA (M) |
|
Connectivity Technology |
Shielded |
|
Color |
Black |
|
Length |
4 ft |
|
Contents |
Cable, documentation |
|
Ports/Connectors |
(2) RCA connectors
(1) mini phone stereo 2.5mm male connector |
|
|
|
|
|
|
|
| Base SKU: |
2.5 RCA/4MM |
|
|
|
|
Ipod Docking to rca & Charging cable (PRECISION INTERFACE)
|
|
|
|
|
| Description: |
The PIE RCA-POD Audio cable is designed to connect to your iPOD
through the bottom connector and give you left & right line level audio
outputs, (RCA connectors) that will allow you to connect the iPOD to
an after market or factory radio that has auxiliary audio inputs. The
RCA-POD will also charge your iPOD while connected through a 12V
and ground connection. Control of the iPOD will remain with the iPOD.
This device conects to your auxiliary input converter's RCA connectors
and to the bottom connector of your iPOD. You then connect the ground
(Blk) wire, the switched 12V (Red) wire and the constant 12V (Yellow) wire
and you are all set. When connected, you will get the cleanest sound,
fixed-level signal output plus it will also charge your iPOD while you are using it
Compatible with iPod Mini, Color, Nano, Photo, Video, G3, G4,G5,iphone and classic
5 volt charging
for iPhone , iTouch and new nano use this interface RCA-IPD |
| Base SKU: |
rca-pod |
|
|
|
|
Dual audio interface (PRECISION INTERFACE)
|
|
|
|
|
| Description: |
AUXILIARY AUDIO SWICH
The son-aux is a current sensing device that will automatically interrupt the audio lines going to
the radio (and switch in an external rca signal)whenever audio signal is detected on its rca input the son-aux audio lines will.
This interface can be use with any of aux interface to add a second aux input to your factory radio |
| Base SKU: |
SON-AUX |
|
|
|
|
